For the metallurgical industry
Insulating mixture for cast iron ladles
It is used for warming the cast iron mirror during transportation and sludge of the cast iron ladle. The mixture has a high flowability and liquid mobility. Due to its chemical composition, it helps reduce the formation of walling and skull of cast iron ladles. The mixture does not contain toxic elements and does not emit toxic gases while it is on the metal mirror, so it does not pollute the surrounding atmosphere and does not affect the gas level of the blast furnace and mixing plants.
Insulating mixture for ladle
This product is intended for warming the metal mirror in ladle. Products allow you to cover the metal surface and limit the access of oxygen to the metal surface, providing protection from sudden temperature changes by reducing convection heat transfer. Scope: it is recommended to apply to all brands of steel. Served manually in polypropylene bags or with the help of a crane in big bags. The advantage of this material is the consumption of the mixture - 0.32 kg / ton of steel (4-5 times less than in similar products of Ukrainian manufacturers), as well as high flowability.
Insulating mixture for tundish
The product is intended for warming the metal mirror in the tundish. The product allows to cover the metal surface and limit the access of oxygen to the metal surface, reduce heat loss and the amount of non-metals due to the assimilating properties of the mixture. Scope: it is recommended to apply to all brands of steel. Served manually in polypropylene bags.
Insulating mixture for mould
This product is designed for thermal insulation of metal in molds. The product allows to cover the metal surface and limit the access of oxygen, providing protection from abrupt heat losses, prevents the occurrence of shrink holes, improves the ingot surface, reduces the number of surface defects. Scope: it is recommended to apply to all brands of steel. Served manually in polypropylene or paper bags.
It is used to protect the metal in the CCM mould. Mixture is made by mechanical mixing and granulation of pre-prepared components with stable characteristics with the addition of various fluxes. The mixtures provide stable properties of the protective coating, trouble-free operation of the equipment of the continuous casting machine, makes it possible to reduce the stress fluctuations on the slab CCM, reduce the number of surface defects, which contributes to an increase in the yield of continuously cast billets and good rolled products.
Filler sand based on chromite sand (South Africa). Used to fill the steel outlet of the slide gates of the casting and intermediate ladles to ensure a spontaneous start of casting. The percentage of unprompted opening of the sliding gate during operation of our mixture is 98%.
Ramming mass for freeboard
It serves to strengthen the free side of the steel ladle. Promotes reliable fixing of the last row of bricks. It has a higher resistance compared to concrete masses used for similar tasks.
Ramming mass (aluminium composition)
It is used for ramming weldblocks of steel ladle. Application for consolidation and ramming of temperature seams of thermal units is possible. It has high abrasive and thermal resistance to molten metal. Can be used in blocks with high static loads.
Ramming mass for tundish funnels. It serves for lining the metering funnels and the bottom of the tundish. It can be used for ramming weldblocks of steel ladle. Application for different brands of steel is possible.
Gunning masses for high temperature aggregates
It is used for gunning of any surfaces of high-temperature units. It has low thermal conductivity and low rebound angle during shotcrete (less than 8%). After curing, the gunning mass has high strength characteristics.
Gunning mass for casting bed
It is used for quick repair of all types of casting beds. The gunning machine is applied, it allows to make express repairs, does not require specific drying modes, and can be put into operation according to the company's documentation.
Gunning mass for tundish
Gunning mass is used to apply the working lining layer, which is in contact with the molten metal in the tundish. It is applied by a mechanized method using machines for gunning the tundish.
Backup lining concretes
They are used to create a backup lining layer of steel-ladle, tundish and cast-iron transport gutters. Concretes have high adaptability and mechanical strength.
Lightweight insulating concretes
Scope: are intended for thermal insulation of high-temperature thermal units for various purposes, heat-and-power boilers and installations, heating furnaces, chemical reactors, metallurgical units, transport chutes. They serve to protect steel structures from overheating and premature wear. Contribute to the preservation of heat in thermal units.
It serves to close the bay channel of an electric arc furnace, contributes to the unprompted start of the metal during draining, without burning it with oxygen.