This refractory mass is designed for lining the main, transport, and tilting runners of a blast furnace system. Its use ensures reliable and trouble-free operation of cast house runners 24/7, minimizes production costs, and contributes to improving the overall efficiency of the production process.
VLM is a specialized refractory mass used for repair and maintenance work in the cast house. It is particularly effective for lining hot-metal runners and ladles, as well as for refractory lining applications in hot-metal ladles. Thanks to its properties, the mass provides high thermal resistance, reduces equipment wear, and extends its service life.
BLM is a specially formulated refractory mass designed for reliable plugging of blast furnace tap holes. It ensures stable and consistent blast furnace operation, reduces heat losses, and enhances the safety of equipment operation.
Used to create the backup (safety) lining layer of the steel ladle, the tundish and hot metal transport runners. The castables have high workability and mechanical strength.
Used for the rapid repair of all types of cast house runners. It is applied with a gunning machine, allows express repairs, requires no specific drying regimes and can be put into operation in accordance with the enterprise's technical regulations.
Serves to strengthen the freeboard of the steel ladle. It ensures reliable fixing of the last row of bricks. It has higher durability compared with the castable masses used for similar tasks.
A starter mixture based on chromite sand (RSA). It is used to fill the tap holes of the slide gates of steel ladles and tundishes to ensure a self-opening start of casting. The rate of self-opening of the slide gate when using our mixtures is 98%.
Used to protect the metal in the mould of a continuous casting machine (CCM). The mixtures are produced by mechanical blending and granulation of pre-prepared components with stable characteristics, with the addition of various fluxes. The mixtures ensure stable properties of the protective layer and trouble-free operation of CCM equipment, make it possible to reduce the withdrawal oscillation forces on slab CCMs and to reduce the number of surface defects, which contributes to a higher yield of continuously cast billets and rolled products.
The product is intended for insulating the metal surface in ingot moulds. The product makes it possible to cover the metal surface and limit the access of oxygen, providing protection against sharp heat losses, preventing the formation of shrinkage cavities, improving the ingot surface and reducing the number of surface defects. Field of application: recommended for all steel grades. It is fed manually in polypropylene or paper bags.
The product is intended for insulating the metal surface in the tundish. The product makes it possible to cover the metal surface and limit the access of oxygen to it, to reduce heat losses and the amount of non-metallic inclusions thanks to the assimilating properties of the mixture. Field of application: recommended for all steel grades. It is fed manually in polypropylene bags.
The product is intended for insulating the metal surface in the steel ladle. The product makes it possible to cover the metal surface and limit the access of oxygen to it, providing protection against sharp temperature fluctuations by reducing convective heat exchange. Field of application: recommended for all steel grades. It is fed manually in polypropylene bags or by crane in big bags. The advantage of this material is the mixture consumption — 0.32 kg per tonne of steel (4–5 times less than in similar products of Ukrainian manufacturers), as well as its high spreading capacity.
Suitable for insulating the hot metal surface during the transportation and holding of hot metal ladles. The mixture has a high degree of flowability. Thanks to its chemical composition, it helps reduce skull build-up in hot metal ladles. The mixture contains no toxic elements and, while on the metal surface, does not release toxic gases, so it does not pollute the environment and does not affect the level of gas contamination in the blast furnace and mixer shops.
Used for gunning any surfaces of high-temperature units. It has low thermal conductivity and a low rebound rate during gunning (less than 8%). After gaining strength, the gunning mass has high performance characteristics.
Serves to close the eccentric bottom tapping channel of the electric arc furnace and promotes the self-opening flow of metal during tapping, without oxygen lancing.
Field of application: intended for the thermal insulation of high-temperature thermal units of various purposes, thermal power boilers and installations, heating furnaces, chemical reactors, metallurgical units and transport runners. They serve to protect metal structures against overheating and premature wear. They help retain heat in thermal units.
The gunning mass is used to apply the working layer of the lining that comes into contact with the molten metal in the tundish. It is applied by a mechanised method using tundish gunning machines.
A ramming mass for tundish funnels. It serves for lining the funnels of the metering assembly and the tundish bottom. It can be used for ramming the well blocks of the steel ladle. It can be applied for various steel grades.
Used for ramming the well blocks of the steel ladle. It can also be used for sealing and ramming the expansion joints of thermal units. It has high abrasion and thermal resistance to molten metal. It can be used in assemblies with high static loads.
We work not for the sake of the process, but to achieve specific goals aimed at the development of our company and the business of our clients.
We will calculate a solution for your unit and temperature conditions.
